PW-5 Automatic Curing and Painting Production Line
1. After three-time heating-curing and two-time painting, the surface of the dry concrete
tile has been covered by high-grade coating.
2. During the whole course of curing and painting, the whole production line is automatically
2. During the whole course of curing and painting, the whole production line is automatically
operated. Moreover, paint-supplied device adopts a high-pressure airless spraying system.
3. Under the 80 kg/m² pressure, the paint can be totally atomized and its utilization ratio
is about 95%.
4. According to the different situation and demand of customers, the pw-5
equipment can chose fuel oil or electricity-heating tubes as the heating device.
5. This equipment can spray not only oil-based paint but also water-based paint.
5. This equipment can spray not only oil-based paint but also water-based paint.
Adjusted control parameters, it also can be used in the plate products.
Main Technical Parameters
Specification: Pw-5
Production Capacity: 16000-120000pcs/8Hours
Width of Transmitting: 1450mm
Height: 750mm
No of List : 5 lists
Kinds of Painting: Oil/Water
Power :15kw
Weight: App 12 tons
Fuel: 20~30L/Hour
Compressed Air : 2800L/Minute
Dimension : 21000×2800×2800mm
Specification: Pw-5
Production Capacity: 16000-120000pcs/8Hours
Width of Transmitting: 1450mm
Height: 750mm
No of List : 5 lists
Kinds of Painting: Oil/Water
Power :15kw
Weight: App 12 tons
Fuel: 20~30L/Hour
Compressed Air : 2800L/Minute
Dimension : 21000×2800×2800mm
If you need customized equipment, please by www.gmterrazzomachine.com contact with our factory.
没有评论:
发表评论